Mobile Codes

Fab's AutoBackup 7 Pro

Mobile Codes
Mobile Phone Codes

 

 

 






Mobile Codes

Mobile Phone Codes for Apple and Android

Extend Ringtone
* * 61 * 1 0 1 * * (number of seconds: 15, 20, 25 or 30) #

Android Codes

WLAN, GPS and Bluetooth Test Codes:

*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#232338#*#* – Shows WiFi MAC address
*#*#1472365#*#* – GPS test
*#*#1575#*#* – Another GPS test
*#*#232331#*#* – Bluetooth test
*#*#232337#*# – Shows Bluetooth device address

Codes to get Firmware version information:

*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate
*#*#1234#*#* – PDA and Phone
*#*#1111#*#* – FTA SW Version
*#*#2222#*#* – FTA HW Version
*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number

Codes to launch various Factory Tests:

*#*#0283#*#* – Packet Loopback
*#*#0*#*#* – LCD test
*#*#0673#*#* OR *#*#0289#*#* – Melody test
*#*#0842#*#* – Device test (Vibration test and BackLight test)
*#*#2663#*#* – Touch screen version
*#*#2664#*#* – Touch screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – RAM version

HASH CODES
*983*32# -T2 software version for t2 ND T90
*3370# – emergency power
*#33# – displays barring on your phone
*#30# – shows caller id if enabled
*3001#12345#* – opens field test on your phone
*#*#34971539#*#* – phone camera  info (do not select)
*#06# – imei number
**61*101**30# – change ring time
*9930# – home 101 extension code
*#*#4636#*#* – android functionality test options
*983*987# – ZTE reset
*#0000# – Nokia software version
##002# – remove all active diverts
*#*#7780#*#* – factory data reset for android
*2767*3855# – format android phone
*#*#7594#*#* – end call/power
*#*#273283*255*663282*#*#* – file copy for creating backup
*#*#197328640#*#* – service mode

To get the mobile number of the sim card
Either #150# or *#150# or *150#

To apply credit to a mobile phone, quickest way:
Dial #125*1*3*000000000000# (SEND)- Where 000000000000 is the voucher number.
– *#06# on any handset to display the IMEI
– 509*217#86 or *983*57# will factory reset any ZTE handset
– Check data usage at any time by texting “Use” to 176
– Configure MMS to work on any phone by sending an MMS to 176 667
– Want to get straight through to a consultant over the phone? repeatedly press #
– Typing the SIM serial or Bigpond e-mail address into Siebel assets will bring up the corresponding service / account
– If you incorrectly provision an order, you can place it onto a $10 casual plan then re-provision it without incurring ETC’s so long as you do so the exact same day.
– Android phone running slow / laggy? Install Launcher Pro from the Market
– Android phone with poor battery life? Install Juice Defender from the Market (This program will also disable data when the phone is idle which is a huge plus)
– MyBackup is another good free app from the Android Market which will back up
photos, applications, contacts, call logs, bookmarks, SMS, MMS, Calendar appointments,
system settings, alarms and more on any Android handset

Samsung S5510 hard reset
Samsung S5510 phone: Enter *2767*3855#.

Samsung Mozart 7 Hard reset
1.With the phone turned off, press and hold the VOLUME UP and DOWN buttons, and then briefly press the POWER button.
2.Wait for the screen to show the instructions on how to do the factory reset, and then release the VOLUME UP and DOWN buttons.

IMEI port check

In order to change a customer’s SIM pin easily on any phone (except some ZTE handsets) dial: **04*OLDPIN*NEWPIN*NEWPIN#

If you are locked out of a Telstra smart touch via pattern lock go to emergency call and put in *983*987# and it will ask if you want to factory reset your device.

Factory reset codes:
– Samsung: *2767*3855#
– Nokia: *#7370# then pin: 12345
– All Android: hold power up volume and home key then follow options
– All windows: through the settings and then “about”
– Iphones: switch phone off, hold home button and plug into computer

Mobile Phone Set-Up:
http://configure.telstra.com.au/telstra/index.jsp

You can bypass MotoBlur activation on any Motorola handset doing the following:
Start by getting to the “Select Language” part of the setup and hold down the menu button to bring up the keyboard.
Enter the following:

-?123
-ALT
-ABC
-e
-?123
-ALT
-ABC
-e
-b
-l
-u
-r
-o
-f
-f

To check the message center number on an iPhone dial: *#5005*7672# and Call
to change it: **5005*7672*+61418706700# and Call

Remove Message bank:
#002# to remove all diversions. This will activate voice2txt

To check the message center number on an iPhone, dial
*#5005*7672# and Call
to change it
**5005*7672*+61418706700# and Call

How to get to the developer settings on the Galaxy S4

1. Head into the Settings menu. Samsung’s done things a little differently and changed the way the settings menu looks, so you’ll need to hit the “More” tab, and then get
into the Software information.
2. Look for “About device” at the bottom. Tap it.
3. Hop on down to the build number, and tap it seven times. One. Two. Three. Four. Five. Six. You’ll get a little prompt saying you’re about to unlock the developer
settings. Hit that button one final time — seven! — and they’re unlocked.

GeGeek

Owner and Creator of GeGeek

GeGeek has 302 posts and counting. See all posts by GeGeek

Leave a Reply

Your email address will not be published. Required fields are marked *